Before use

Activation, washing, and valuable tips 

1. Cleaning cloths can be used for up to several years in domestic conditions, and the more often they are washed and used, the better they clean.

2. Before first use, wash the cleaning cloths at least three times in an automatic washing machine on a short 60°C cycle. This will rinse out any fiber scraps, open up the fibers in the water bath, and make them ready for use.

3. When activating the pink material and sunbeams, we recommend washing them separately in the drum, e.g., in a pillowcase or laundry bag.

4. Do not leave dirty wipes to dry. Soak them in clean water and then wash them in Nano Silver liquid or a little washing powder.

5. Wash by hand using NanoSilver antibacterial soap or in an automatic washing machine at 60°C (using Raypath washing liquids or any washing powder) and at a maximum speed of 800 rpm.

6. Do not use fabric softeners or fabric conditioners, as they soften the fibers and do not clean the surface thoroughly.

7. Avoid intense drying, especially in automatic dryers, on radiators, and in direct sunlight.

8. Clean from the cleanest to the dirtiest surfaces.

9. Use wet gloves (white, white nova, beige) in combination with Sunbeam.

10. When using a window and mirror cleaner, use Sunbeam to wipe the rubber seal of the cleaner and collect water from the edges of the surface.

11. The color of Sunbeam does not matter, as is the case with the color of gloves and floor pads.